Posterize PDF
Split a large PDF page across multiple printable sheets with overlap for taping, so you can print a poster on an ordinary printer.
Upload PDF File
Über dieses Tool
You have an A0 poster and an A4 printer. Printing to fit produces something the size of a postcard. Posterising goes the other way: the large page is divided across a grid of ordinary sheets that you assemble into the full-size result.
The overlap setting is what makes it work in practice. A few millimetres of shared content along each edge gives you something to align when taping the sheets together - without it, matching the seams exactly is near impossible.
Choose the grid to match your output size: 2 by 2 sheets for a poster twice as wide and tall, 3 by 3 for larger. Alignment marks are printed in the overlap so the joins line up.
Bedienungsanleitung
Load the PDF
Drop in the large-format document.
Set the grid
Choose how many sheets across and down - 2 by 2, 3 by 3, or larger.
Set the overlap
5 to 10 mm gives you enough shared content to align the sheets when taping.
Generate and print
Download the tiled PDF, print all sheets, and assemble along the overlap marks.
Anwendungsfälle
Posters on an office printer
An A1 design printed across nine A4 sheets and taped together.
Large technical drawings
An engineering drawing printed at full scale without a plotter.
Full-size templates
A sewing or woodworking pattern printed at 1:1 across several sheets.
Häufig gestellte Fragen
How much overlap should I use?
5 to 10 mm. Enough to align and tape, not so much that you waste printable area.
Do I get alignment marks?
Yes, printed in the overlap area so you can match the sheets precisely.
Will the print be at true scale?
Yes, provided you print at 100 percent with no fit-to-page scaling in the print dialog. That setting is the usual cause of a wrong-size result.
How is this different from N-Up?
N-Up puts many pages on one sheet. This spreads one page across many sheets - the opposite operation.